- How-to Guides
- Commercial & Housing Authorities
- Replacement Baseboard Radiator Covers
When the time comes to replace your rusted and outdated baseboard heater cover, it isn’t often clear where you should begin with the process. For some, this project may seem confusing and can lead them to push it off. Learn how to measure and cut a steel baseboard heater cover; it’s really not as hard as you might think!
From the time cavemen discovered fire, we’ve used heat to not only cook our food but keep ourselves warm during the harsh, cold nights. Throughout the generations, we learned to hone fire to our will, even so much as to gather heat from something other than flames. It’s through this intuitive nature that we created what we know today as the modern home baseboard radiator. This is a brief history of home radiators and their evolution over the generations.
When you’re the owner of a child daycare, parents are entrusting their precious bundles of joy to you each day. It’s your duty to ensure that these children remain healthy, happy, and safe in your care. These are just a few simple ways to make your daycare safer.
Baseboard heaters are great for heating your home and making it comfortable for you to live in; however, not all models are equipped for efficiency. This is especially the case if your home has an electric baseboard heater, as they could use more energy than you intend. To save some money while maintaining a comfortable home, learn how to bring down your baseboard heating bill.
As tempting as it is to want to cover up our unsightly baseboard heaters, it’s often considered dangerous. It’s a hazard to cover a heater with some objects. However, this isn’t the case with professionally-made baseboard heater covers. Learn whether it’s safe to cover a baseboard radiator and how to appropriately do so.
The holidays offer the perfect time to have all your family and friends over for a party. With many people packed into your home, however, seemingly harmless environments can quickly turn dangerous. It’s for this reason that you need to maximize your home’s safety before you allow guests to visit. Practice these essential home safety tips for holiday parties to ensure your event remains safe and fun for all involved.
The holiday season is approaching faster than expected, and the clock is ticking to get your home ready to host family gatherings. But cleaning isn’t the only thing you should be thinking about. With family members congregating in your home, this is also the perfect time to upgrade and liven up that space. Use a few of these easy upgrades for your home during the holidays to get you started.
With winter fast approaching, our baseboard heaters have become an essential part of our everyday comfort. However, despite how much we need them to keep us warm amidst frigid temperatures, they could become a hazard for younger family members. As such, you must take additional steps to childproof your baseboard heating systems to prevent a tragic accident from occurring.
Measure the height from the floor to the top of the metal wall plate.
Follow our guide for baseboard heater cover measurement:
Any baseboard larger than 7 3/8" (188 mm) will be compatible with our standard cover.
Any measurement greater than 9 3/8" (238 mm) will fit our tall cover.
Measure from the bottom of the finned tube heating element to the top of the metal wall plate,
A measurement of 5 1/2" to 6 3/4" (140 mm – 172 mm) will fit our standard cover.
A measurement of 7 1/2" to 8 3/4" (191 mm – 222 mm) will fit our tall cover.
Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our tall cover.
EZ Snap™ Wall Widgets are used when your old or existing wall back plate has been removed or if you have to hang your new cover 1 inch or higher to bring them up to a height that will fit our installation guidelines. Just measure your overall desired height, subtract 1", drill a hole, preferably in a stud and attach it to the wall with the included screw.
EZ Snap™ Floor Fidgets easily raise your new covers ¾ inch to compensate for any ¾ inch floor (wood, tile, or other) that has been installed any time since your baseboard heater was originally installed. May be used for any reason when the overall height has been shortened and the total height is less than 7-½ inches for standard height or 9-½ inches for the TALL height EZ Snap™ BaseBoard Covers. Just use the self-tapping screws to secure them to the top of your existing wallplate.
EZ Snap™ Wall Contraptions are used when your wall back plate has been completely removed. EZ Snap™ Wall Contraptions receives your EZ Snap™ BaseBoard Cover and keeps your aluminum fin tube from sagging. These completely replace your wall back plate. To install, slide up from the bottom and make sure the top is at your desired height. Screw to the wall, then bend the front finger up to hold the fin tube in place.
Measure from wall to wall and subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 flush to wall end caps.
Measure the overall length of the existing unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 Closed or Open-end caps.
Measure from the corner to the end of the unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 1 Closed or Open-end & 1 flush to wall end cap.
Measure the left side from corner A to corner B (see diagram). Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side if also wall to wall. You need to subtract a total of 3½ inches from each side that is wall to wall. Choose your end caps.
Measure the left side from the corner of the wall to the end of the unit with ends caps. Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side. You need to subtract a total of 3½ inches from both left and right sides. Choose your end caps.
L-Shaped outside radiators ending in the middle of the wall:
Measure from outside corner of the wall A to the end of the radiator unit with end caps attached B, then subtract ½" (to allow for wiggle room when installing your new covers.)
Measure from outside corner of the wall to the corner of the wall, then subtract 1/2" (to allow for wiggle room when installing your new covers.)
Left leg - measure from the corner out to the end of the radiator subtract 3" for the corner and ½ (to allow for wiggle room when installing your new covers.)
Center leg - measure from corner to corner and subtract 3" for each corner a total of 6"
Right leg - measure from the corner out to the end of the radiator subtract 3" for the corner and ½" (to allow for wiggle room when installing your new covers.).
We recommend that you order covers a little longer than normal and cut them on site, as there are many opportunities for mistakes in measuring and installation. By cutting on site you can fit and cut to fit. The covers can be cut with a good quality jigsaw and a fine metal cutting blade.
Now that you’ve learned how to measure baseboard heaters,
you’re ready to order.