No plumber. No mess.
Covers snap over the heater you already own. Most jobs need no power tools and no professional HVAC bill.
Why EZ Snap
Why EZ Snap?
Skip plastic store covers and skip a contractor bill. Snap 1.01 mm thick American steel over the heater you already have — and get a lifetime rust warranty plus a human on the phone if you get stuck.
See the difference
Most people are choosing between living with rust, buying flimsy plastic, or paying a contractor. EZ Snap is the fourth option — and the one that actually lasts.
| What matters | EZ Snap | Plastic store covers | Hire a contractor |
|---|---|---|---|
| Material | 1.01 mm thick galvanized steel, epoxy powder coat | Thin imported plastic that can warp and fade | Often the same old rusty metal, just repaired |
| Install | Snaps over ~95% of hydronic units in minutes | One-size kits that rarely fit cleanly | Days of labor, dust, and a contractor invoice |
| Rust protection | Lifetime rust warranty for the original purchaser | No steel. No rust warranty. | Depends on the job — rarely lifetime |
| Fit | Custom lengths, 7.5" or 9.5", 90° and 45° corners | Limited lengths, weak corners | Custom, at custom prices |
| Help | Call a human at 866-740-0005. We will not let you fail. | A bag in a box. You are on your own. | Help only while they are on site |
Six reasons people switch
Steel, not plastic
1.01 mm thick galvanized steel with a baked-on epoxy powder coat — 18% stronger and thicker than typical covers, and built to stay straight on the wall.
Lifetime rust warranty
If a cover rusts from a materials or manufacturing defect under normal indoor use, we repair or replace it for as long as you own the home where it was installed.
Cut for your rooms
Any length, plus inside/outside 90° and 45° bay-window corners, couplers, and end caps. Build a kit room by room instead of guessing at a one-size box.
Safer around kids
A finished steel face helps keep little hands off sharp hydronic fin tubes — a real upgrade, not just a cosmetic one.
Humans, not chatbots
Over 95% of customers measure and install themselves. If you get stuck, call the office during business hours. 14-day worry-free returns in like-new condition.
How easy is it?
Measure. Order. Install. You will be done in a snap.
Measure
A tape measure and a few minutes. Measure left to right, twice. We will walk you through it.
Order
Pick 7.5" or 9.5", a color, and custom lengths in the kit builder — or call 866-740-0005 and we will build it with you.
Install
Snap the new cover over the existing back plate. Most homeowners finish a room in minutes, not a weekend.
Lifetime rust warranty
Galvanized steel plus epoxy powder coat, backed in writing for the original purchaser.
14-day returns
Worry-free money-back returns in like-new condition. If we shipped the wrong part, we cover the return.
We will not let you fail
Stuck on a measurement or a corner? Call. A person in Ohio will help you finish the job.
Before you buy
Can these go on electric baseboard heaters?
No. EZ Snap covers are for hydronic (hot water) baseboard heaters only. Covering an electric heater can change its safety rating. Do not put a cover on any electric unit.
I have seen plastic covers in stores. What are these made of?
American galvanized steel, 1.01 mm thick, then epoxy powder coated. They are not plastic, and they are not imported throwaways.
What if my heaters go around a corner or bay window?
We make inside and outside corners in 90-degree (square) and 45-degree (bay window) pieces, plus couplers for longer runs.
What sizes and colors can I order?
White, Silver, Espresso Bronze, and Satin Black — each in 7.5" standard and 9.5" tall. Custom lengths; pieces over 7 ft typically ship in sections with couplers.