Six steps to decorating your bedroom

A A A

Six steps to decorating your bedroom

Is your bedroom starting to look boring? The thought of redecorating it may seem daunting but it can actually turn out to be a fun project. Even if you don’t have any experience with interior design, you can get great results just by following these six easy steps.

Decide what you love. Before you do anything else, start thinking about the things you’d like to do with the space. You can turn to interior design magazines and the internet for inspiration. Keep in mind the architecture and size of your bedroom and always be thinking about the practicality of your ideas given the space. Also think about preferred colors and styles. Do you want to go with a classical look or something more modern?

Paint your walls. Repainting the room a different color is probably the most cost effective way to change the entire look of that room. Choose a color you love and make sure to consider how that color will look with different amounts of light throughout the day. It doesn’t matter which color you choose so long as you can match it with other things that will be going into the room.

Select bedding. Since the bed takes up a lot of real estate, the bedding is going to really stand out. Swapping out the bedding is another great way to drastically change the look of your bedroom. Get something that looks nice, you shouldn’t be spending $40 for a bedding set that you’d see in a dorm room. Bright colors can create a lot of visual interest while subtle colors will make your room look more elegant and stately.

Lay out furnishings. Now that the room’s focal point is finished, you can turn your attention to other furnishings that take up a fair amount of space. A bedside table or two is always a safe bet, as is a wardrobe or dressing table. Choose your furnishings wisely as they take up valuable space and if you make the mistake of getting too much furniture, your bedroom will seem cramped.

Get flowers. If we have any flowers inside our home at all, they’re probably in a front room or in the kitchen. But flowers can look great in the bedroom as well and they add a touch of nature to it. A few well-chosen flowers in your bedroom can improve your mood and will fill your room with a pleasant aroma.

The final touches. Finally, it’s time to bring it all together with some carefully chosen finishing touches. Make sure there’s plenty of lighting and add some window treatments such as curtains or drapes. You should also select some small décor items as well as some artwork or photographs to display. Remember, when it comes to accessories, less is more so be careful not to do too much or you’ll make your room seem cluttered.

Source: Examiner

Also in EZ Snap Covers Blog

Upgrading Your Home One Room at a Time

First Time Buyer Special on Baseboard Heater Covers

50%-Off First-Time Buyer Special Offer on EZ-Snap Heater Covers

Make Your Home Look Great with EZ Snap Covers

How to measure baseboard heaters:

Step 1
HOW TO MEASURE

Always measure left to right, and twice for accuracy

Floor to top of Fintube | EZ Snap™ Baseboard Heater Covers

Step 1: Floor to top of Wall plate

Measure the height from the floor to the top of the metal wall plate.

Follow our guide for baseboard heater cover measurement:

Any baseboard larger than 7 3/8" (188 mm) will be compatible with our standard cover.

Any measurement greater than 9 3/8" (238 mm) will fit our tall cover.

Fin Tube Height | EZ Snap™ Baseboard Heater Covers

Step 2: Bottom of Fintube to Top of Wall Plate

Measure from the bottom of the finned tube heating element to the top of the metal wall plate,

A measurement of 5 1/2" to 6 3/4" (140 mm – 172 mm) will fit our standard cover.

A measurement of 7 1/2" to 8 3/4" (191 mm – 222 mm) will fit our tall cover.

Depth | Measure | EZ Snap™ Baseboard Heater Cover

Step 3: Back Wall to Front of Fintube

Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.

Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our

standard cover.

Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our tall cover.

Step 2
DETERMINE IF BRACKETS ARE NECESSARY

Always measure left to right, and twice for accuracy

Wall Widget

EZ Snap™ Wall Widgets are used when your old or existing wall back plate has been removed or if you have to hang your new cover 1 inch or higher to bring them up to a height that will fit our installation guidelines. Just measure your overall desired height, subtract 1", drill a hole, preferably in a stud and attach it to the wall with the included screw.

Floor Fidgets

EZ Snap™ Floor Fidgets easily raise your new covers ¾ inch to compensate for any ¾ inch floor (wood, tile, or other) that has been installed any time since your baseboard heater was originally installed. May be used for any reason when the overall height has been shortened and the total height is less than 7-½ inches for standard height or 9-½ inches for the TALL height EZ Snap™ BaseBoard Covers. Just use the self-tapping screws to secure them to the top of your existing wallplate.

Wall Contraptions

EZ Snap™ Wall Contraptions are used when your wall back plate has been completely removed. EZ Snap™ Wall Contraptions receives your EZ Snap™ BaseBoard Cover and keeps your aluminum fin tube from sagging. These completely replace your wall back plate. To install, slide up from the bottom and make sure the top is at your desired height. Screw to the wall, then bend the front finger up to hold the fin tube in place.

Step 3

HOW TO MEASURE LENGTH

Based on how your heater is configured,

choose an option below to expand and view

specific hot water baseboard heater measurement templates.

[+] Option 1: Straight Heater Configuration

[+] Option 2: L-Shape and U-Shape Configuration

[+] Option 3: 45 Degrees, Z-Shape Configuration

Congratulations!

Now that you’ve learned how to measure baseboard heaters,

you’re ready to order.

READY TO START
YOUR ORDER NOW?