STANDARD 7 1/2" Height - WHITE Cover Kit - 2 CLOSED Endcaps
$105.00
• Constructed from durable 20 gauge galvanized steel, 18% thicker than similar products• Modern white epoxy powder coating ensures a rust-free lifetime• Easy installation with EZ Snap Covers, fitting over 95% of existing hot water baseboard heaters in under five...
STANDARD 7 1/2" Height - WHITE Kit - 2 FLUSH Endcaps
$105.00
Built with sturdy, long-lasting 20 gauge galvanized steel featuring a modern white epoxy powder coating that is guaranteed never to rust and is 18% thicker steel than all comparable baseboard heater covers. End caps made with 18 gauge galvanized steel....
STANDARD 7 1/2" Height - WHITE Cover Kit - 2 OPEN Endcaps
$105.00
Built with sturdy , long-lasting 20 gauge galvanized steel featuring a modern white epoxy powder coating that is guaranteed never to rust and is 18% thicker steel than all comparable baseboard heater covers. End caps made with 18 gauge galvanized...
UNBELIEVABLE FIRST-TIME BUYER 50% OFF SALE!! Enter FIRST50 @ Check Out One cover (up to 4’ long) and 2 end caps! Key Features: Effortless Installation Superior Quality Modern Design Enhanced Safety Exclusive Offer: For First-Time Buyers Only! Enjoy our Exclusive,...
Built with sturdy, long-lasting 20 gauge galvanized steel featuring a modern white epoxy powder coating that is guaranteed never to rust and is 18% thicker steel than all comparable baseboard heater covers. End caps made with 18 gauge galvanized steel....
Build your own kit! Please Note: Please measure left to right. All covers over 7' will be shipped in halves. (10' will ship 2x 5' pcs.) Max single cover part length is 7', so be sure to have enough couplers...
Standard 7 1/2" White Kit with Left Flush and Right Closed Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Flush ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Closed ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Standard 7 1/2" White Kit with Left Closed and Right Flush Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Closed ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Flush ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Standard 7 1/2" White Kit with Left Closed and Right Open Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Closed ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Open ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Build your own kit! Please Note: Please measure left to right. All covers over 7' will be shipped in halves. (10' will ship 2x 5' pcs.) Max single cover part length is 7', so be sure to have enough couplers...
Standard "7 1/2" Height" Galvanized Kit Constructor
Build your own kit! Please Note: Please measure left to right. All covers over 7' will be shipped in halves. (10' will ship 2x 5' pcs.) Max single cover part length is 7', so be sure to have enough couplers...
Standard 7 1/2" White Kit with Left Open and Right Open Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Open ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Open ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Standard 7 1/2" White Kit with Left Open and Right Flush Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Open ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Flush ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Standard 7 1/2" White Kit with Left Open and Right Closed Endcaps
$90.47
Product Specifications
Size: 7-1/2" Standard Color: White
Parts Included: 3 (+ couplers if needed)
Left Endcap: Open ($22.95)Cover Length: Varies ($21.95 per foot)Right Endcap: Closed ($22.95)
Cover lengths over 7 feet require mesh couplers
Couplers: Varies ($16.96 per coupler)
Whether you’re renovating your baseboards heaters or just looking for something simple to enhance your home’s beauty, consider our baseboard wall heater covers. These covers can be a quick and easy solution to upgrade the look of your heating system. No more unsightly metal grates or chipped and faded paint—our covers seamlessly enhance your home decor while also providing a protective layer for your heater.
Our covers for heaters come in the standard 7 ½ inch height and Tall 9 1/2 inches height and we offer a variety of closed, flush or open end caps. Crafted from 20-gauge galvanized steel, these baseboard wall heater covers easily snap onto your existing baseboard heater; beyond looking great, they are also guaranteed to never rust!
For safe, durable, and easy-to-install baseboard wall heater covers, look no further than EZ Snap Covers. If you have any questions related to our baseboard heater cover kits, please feel free to reach out to us via our contact page.
Measure Your Baseboard Heaters
How to measure baseboard heaters:
Step 1 HOW TO MEASURE
Always measure left to right, and twice for accuracy
Step 1: Floor to top of Wall plate
Measure the height from the floor to the top of the metal wall plate.
Follow our guide for baseboard heater cover measurement:
Any baseboard larger than 7 3/8" (188 mm) will be compatible with our standard cover.
Any measurement greater than 9 3/8" (238 mm) will fit our tall cover.
Step 2: Bottom of Fintube to Top of Wall Plate
Measure from the bottom of the finned tube heating element to the top of the metal wall plate,
A measurement of 5 1/2" to 6 3/4" (140 mm – 172 mm) will fit our standard cover.
A measurement of 7 1/2" to 8 3/4" (191 mm – 222 mm) will fit our tall cover.
Step 3: Back Wall to Front of Fintube
Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our
standard cover.
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our tall cover.
Step 2 DETERMINE IF BRACKETS ARE NECESSARY
Always measure left to right, and twice for accuracy
Wall Widget
EZ Snap™ Wall Widgets are used when your old or existing wall back plate has been removed or if you have to hang your new cover 1 inch or higher to bring them up to a height that will fit our installation guidelines. Just measure your overall desired height, subtract 1", drill a hole, preferably in a stud and attach it to the wall with the included screw.
Floor Fidgets
EZ Snap™ Floor Fidgets easily raise your new covers ¾ inch to compensate for any ¾ inch floor (wood, tile, or other) that has been installed any time since your baseboard heater was originally installed. May be used for any reason when the overall height has been shortened and the total height is less than 7-½ inches for standard height or 9-½ inches for the TALL height EZ Snap™ BaseBoard Covers. Just use the self-tapping screws to secure them to the top of your existing wallplate.
Wall Contraptions
EZ Snap™ Wall Contraptions are used when your wall back plate has been completely removed. EZ Snap™ Wall Contraptions receives your EZ Snap™ BaseBoard Cover and keeps your aluminum fin tube from sagging. These completely replace your wall back plate. To install, slide up from the bottom and make sure the top is at your desired height. Screw to the wall, then bend the front finger up to hold the fin tube in place.
Step 3
HOW TO MEASURE LENGTH
Based on how your heater is configured,
choose an option below to expand and view
specific hot water baseboard heater measurement templates.
Measure from wall to wall and subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 flush to wall end caps.
Measure the overall length of the existing unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 Closed or Open-end caps.
Measure from the corner to the end of the unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 1 Closed or Open-end & 1 flush to wall end cap.
Measure the left side from corner A to corner B (see diagram). Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side if also wall to wall. You need to subtract a total of 3½ inches from each side that is wall to wall. Choose your end caps.
Measure the left side from the corner of the wall to the end of the unit with ends caps. Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side. You need to subtract a total of 3½ inches from both left and right sides. Choose your end caps.
L-Shaped outside radiators ending in the middle of the wall: Measure from outside corner of the wall A to the end of the radiator unit with end caps attached B, then subtract ½" (to allow for wiggle room when installing your new covers.)
Left leg - measure from the corner out to the end of the radiator subtract 3" for the corner and ½ (to allow for wiggle room when installing your new covers.)
Center leg - measure from corner to corner and subtract 3" for each corner a total of 6"
Right leg - measure from the corner out to the end of the radiator subtract 3" for the corner and ½" (to allow for wiggle room when installing your new covers.).
We recommend that you order covers a little longer than normal and cut them on site, as there are many opportunities for mistakes in measuring and installation. By cutting on site you can fit and cut to fit. The covers can be cut with a good quality jigsaw and a fine metal cutting blade.
TWO SIDES HAVE SPACES AND WRAP AROUND WALL TO WALL SECTIONS
Measure from the corner of the wall to the outside corner. Subtract 3" for the 90 degree corner (for both left and right legs). Measure from the corner to the end of the unit with end caps on. Subtract 3" for the 90 degree corner then subtract ½" for wiggle room.
