| EZSnapBaseboardHeaterCovers were featured on NBC's Open House | To watch the full episode click here
EZ Snap Baseboard Heater Covers innovative galvanized steel and epoxy powder coated covers snap right over the top of 95% of existing baseboard heaters Our covers create a beautiful, modern, finished look in any room in a matter of minutes, not days and with no mess. We know it sounds too easy, but it’s true. Rust? Forget about it, our 20-gauge galvanized steel and powder coated covers, are the thickest, strongest on the market today and are guaranteed not to rust.
EZ Snap Baseboard Heater Covers one size fits all product is easy to measure and install, and if custom lengths are needed, we cut them to exact length at no additional cost. You just snap the covers over your existing baseboard radiators and install the end caps. It’s that simple! There are no power tools required for installation, and best of all, no huge professional plumber or HVAC contractor bills.
EZ Snap BaseBoard Heater Covers have a limited lifetime warranty against rust. Our EZ Snap covers are made of galvanized steel which is then powder coated and oven baked (if you choose a color). EZ Snap BaseBoard Heater Covers have a lifetime warranty against rust to the original purchaser for as long as they own the property and the covers have not been modified or damaged in any way. If they rust we will replace them.
Born in the U.S.A.
EZ Snap BaseBoard Heater Covers are made in Cleveland, Ohio, the gold buckle of the rust belt. Our covers are made with American hands, American steel and create American Jobs. We are American and proud of it.
We support the Wounded Warrior Project and Dogs on Deployment.
We Will Not Let You Fail
If you have any questions about measuring or ordering please call or chat with one of our certified technicians who will walk you through the whole process. We can help you measure and even put your order in for you. You can text us pictures, we'll make all the decisions for you. It is that easy, we will not let you fail.
Our Experience and History
Having been in the remodeling business for over 20 years, we knew that there had to be a better way to fix old, ugly baseboard heaters. Our EZ Snap Baseboard Heater Covers are that better way. The bent, rusted, cheesy 1950’s look of the original manufacturing companies are gone and the neat, clean, guaranteed, look of today is here. EZ Snap Covers are modern looking, and are made with 20 guage galvanized steel - THE THICKEST COVER ON THE MARKET TODAY - and powder coated. We believe our product is so truly remarkable, we give a Lifetime warranty against rusting.
Our mission is to ship EZ SNAP HEATER covers to the world in the QUICKEST, worry-free, and most cost effective manner that we can. We have designed them so they are so easy to install that “do it yourselfer’s” can easily install our heater covers with no tools in most cases. In fact, we are so confident that you will absolutely love everything about your new EZ Snap Baseboard Heater Covers, we give a money-back guarantee. If you don’t like them for any reason, we will refund your money. Just within 30 days of receiving your covers, securely package them up as you received them, ship them back by FedEx or UPS, then once we receive the product undamaged and in like new condition we’ll return your purchase price.
Always measure left to right, and twice for accuracy
Step 1: Floor to top of Wall plate
Measure the height from the floor to the top of the metal wall plate.
Follow our guide for baseboard heater cover measurement:
Any baseboard larger than 7 3/8" (188 mm) will be compatible with our standard cover.
Any measurement greater than 9 3/8" (238 mm) will fit our tall cover.
Step 2: Bottom of Fintube to Top of Wall Plate
Measure from the bottom of the finned tube heating element to the top of the metal wall plate,
A measurement of 5 1/2" to 6 3/4" (140 mm – 172 mm) will fit our standard cover.
A measurement of 7 1/2" to 8 3/4" (191 mm – 222 mm) will fit our tall cover.
Step 3: Back Wall to Front of Fintube
Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our
Any measurement of less than 3 1/8" (76 mm) inches from the wall will fit our tall cover.
Step 2 DETERMINE IF BRACKETS ARE NECESSARY
Always measure left to right, and twice for accuracy
EZ Snap™ Wall Widgets are used when your old or existing wall back plate has been removed or if you have to hang your new cover 1 inch or higher to bring them up to a height that will fit our installation guidelines. Just measure your overall desired height, subtract 1", drill a hole, preferably in a stud and attach it to the wall with the included screw.
EZ Snap™ Floor Fidgets easily raise your new covers ¾ inch to compensate for any ¾ inch floor (wood, tile, or other) that has been installed any time since your baseboard heater was originally installed. May be used for any reason when the overall height has been shortened and the total height is less than 7-½ inches for standard height or 9-½ inches for the TALL height EZ Snap™ BaseBoard Covers. Just use the self-tapping screws to secure them to the top of your existing wallplate.
EZ Snap™ Wall Contraptions are used when your wall back plate has been completely removed. EZ Snap™ Wall Contraptions receives your EZ Snap™ BaseBoard Cover and keeps your aluminum fin tube from sagging. These completely replace your wall back plate. To install, slide up from the bottom and make sure the top is at your desired height. Screw to the wall, then bend the front finger up to hold the fin tube in place.
HOW TO MEASURE LENGTH
Based on how your heater is configured,
choose an option below to expand and view
specific hot water baseboard heater measurement templates.
Measure from wall to wall and subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 flush to wall end caps.
Measure the overall length of the existing unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 2 Closed or Open-end caps.
Measure from the corner to the end of the unit with ends attached then subtract ½ inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid ½ inch outward on either end to fit your existing length requirements. Choose 1 Closed or Open-end & 1 flush to wall end cap.
Measure the left side from corner A to corner B (see diagram). Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side if also wall to wall. You need to subtract a total of 3½ inches from each side that is wall to wall. Choose your end caps.
Measure the left side from the corner of the wall to the end of the unit with ends caps. Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.) Repeat for the right side. You need to subtract a total of 3½ inches from both left and right sides. Choose your end caps.
L-Shaped outside radiators ending in the middle of the wall: Measure from outside corner of the wall A to the end of the radiator unit with end caps attached B, then subtract ½" (to allow for wiggle room when installing your new covers.)
We recommend that you order covers a little longer than normal and cut them on site, as there are many opportunities for mistakes in measuring and installation. By cutting on site you can fit and cut to fit. The covers can be cut with a good quality jigsaw and a fine metal cutting blade.
TWO SIDES HAVE SPACES AND WRAP AROUND WALL TO WALL SECTIONS
Measure from the corner of the wall to the outside corner. Subtract 3" for the 90 degree corner (for both left and right legs). Measure from the corner to the end of the unit with end caps on. Subtract 3" for the 90 degree corner then subtract ½" for wiggle room.